Webcam, Mic & Speaker Tester
Test camera resolution & FPS, mic volume dB meter & audio FFT spectrum, and left/right stereo speakers.
In-Browser Screen Recorder
Record desktop tabs, webcam overlays, and microphone audio without watermarks.
Monitor & Screen Diagnostics
Test dead pixels, backlight bleed, and real-time refresh rate (Hz) in full-screen.
Pre-Meeting Diagnostics: Why Built-in OS Meters Fall Short
Nothing is more disruptive to an executive presentation, client sales call, or remote technical interview than starting with: "Can everyone hear me? Is my camera working?"
While operating systems like Windows 11 and macOS provide basic audio input bars in their system settings, these meters fail to disclose critical hardware telemetry:
- No Frame Rate Telemetry: OS settings confirm whether a webcam is connected, but cannot tell you if your camera is streaming at smooth 60 FPS or stuttering at 14 FPS due to USB bandwidth saturation.
- No Clipping Analysis: Simple volume meters show loudness, but cannot distinguish clean high-gain speech from clipped, distorted square waves that make your voice painful to listen to on headphones.
- No Acoustic Frequency Breakdown: OS meters cannot distinguish your vocal frequencies from a 60 Hz electrical ground loop hum or high-frequency cooling fan noise.
- No Channel Isolation: Operating systems do not provide a 1-click left-ear vs right-ear stereo balance test to detect failing headphone cables or inverted wireless Bluetooth channels.
The KitWharf Webcam, Microphone & Speaker Tester solves these limitations by combining W3C WebRTC, Web Audio API, and HTML5 Canvas into a complete, air-gapped hardware diagnostics studio.
Interrogating Video Hardware: Sensor Resolution, Aspect Ratios & Frame Rates
When you click "Start Webcam Test", the tool requests a video stream via navigator.mediaDevices.getUserMedia and interrogates the native MediaStreamTrack:
const track = stream.getVideoTracks()[0];
const settings = track.getSettings();
console.log("Hardware Resolution:", settings.width, "x", settings.height);
console.log("Aspect Ratio:", (settings.width / settings.height).toFixed(2));
console.log("Reported Frame Rate:", settings.frameRate, "FPS");
Real-Time Capture Frame Rate (FPS) Calculation
Many cheap webcams advertise "1080p 60 FPS" on their retail box, but deliver only 30 FPS—or throttle down to 15 FPS in low-light environments.
KitWharf calculates actual capture frame rate in real time using the browser's high-precision requestVideoFrameCallback API. By tracking the timestamp interval between successive rendered frames over a rolling 30-frame window, the tool displays exact live capture FPS down to the millisecond.
Audio Level Engineering: RMS dB Meters vs Peak Clipping
In digital audio, levels are measured in decibels relative to full scale (dBFS), where 0 dBFS represents the maximum possible amplitude before severe digital distortion occurs.
KitWharf implements real-time Root-Mean-Square (RMS) audio processing using a Web Audio AnalyserNode:
WebRTC Video Telemetry & Web Audio FFT Spectrum Engine
Direct hardware interrogation: sensor resolution, true capture FPS, RMS volume dB metering, and stereo channel separation.
Understanding the 3 Meter Zones:
- Silent Zone (0% to 25%): Ambient room noise. If your voice fails to peak above 30%, your colleagues will struggle to hear you. Increase your system input gain or move closer to the capsule.
- Optimal Conversational Speech (30% to 70%): The green zone. Audio is crisp, clear, and provides ample headroom for natural vocal dynamics without distortion.
- Clipping Warning Zone (85% to 100%): The red zone. Sound waves are slamming against digital limits, flattening the sine peaks into harsh square waves. Lower your microphone boost to restore intelligibility.
Frequency Spectrum Analysis: Detecting Room Reverberation & Ground Loop Hum
KitWharf features an authentic Fast Fourier Transform (FFT) real-time visualizer that splits your microphone input across a 256-point frequency spectrum from 60 Hz to 16 kHz:
- Sub-Bass (60 Hz to 120 Hz): A static peak in this lowest band typically indicates an AC ground loop hum from an ungrounded laptop charger or audio interface. Unplugging your laptop charger often eliminates this hum immediately.
- Low-Mids (150 Hz to 400 Hz): Room boominess and HVAC ventilation rumble.
- Mid Vocals (500 Hz to 3.5 kHz): Human speech fundamental frequencies and consonant articulation.
- High Treble (4 kHz to 16 kHz): Sibilance ("S" sounds) and high-frequency PC fan coil whine.
Stereo Imaging & Acoustic Phasing: Left/Right Channel Diagnostics
Failing headphone jacks, damaged 3.5mm cables, or misconfigured Bluetooth audio profiles often cause one audio channel to cut out or blend into a flat mono signal.
The Speaker Diagnostics panel allows you to independently test:
- Left Channel Only: Emits a pure 440 Hz sinusoidal tone routed exclusively to the left speaker driver using a
StereoPannerNodeset topan = -1. - Right Channel Only: Emits the tone exclusively to the right driver (
pan = +1). - Center (Both Channels): Emits balanced stereo sound across both ears (
pan = 0). - Tone Frequency Sweep: Adjust test frequencies from deep bass (100 Hz) to piercing treble (2000 Hz) to detect speaker driver rattle or blown diaphragms.
5-Second Voice Snippet Loopback: Hearing Yourself Exactly as Others Do
Most people have never heard what their microphone actually sounds like across conferencing platforms.
KitWharf provides an instant 5-Second Voice Snippet Recorder:
- Click "Record 5s Voice Snippet" and speak naturally.
- The browser captures audio chunks via
MediaRecorderin local memory. - Once the 5 seconds conclude, the recording automatically plays back through your headphones, allowing you to evaluate your own room acoustics, background fan noise, and vocal clarity before entering important meetings.
Air-Gapped Hardware Audits: Why Web Privacy Matters
Never test your private camera or enterprise microphone on sketchy web portals loaded with third-party tracking cookies, behavioral fingerprinting scripts, or server-side media upload endpoints.
KitWharf guarantees 100% zero-knowledge client-side privacy:
- Video tracks and microphone buffers exist exclusively in local browser RAM.
- No video frames or audio snippets are ever transmitted over the network or saved to disk.
- Closing the tab immediately turns off the camera hardware indicator light and releases all hardware device locks.